After visiting a couple of espresso bars today in NYC, I noticed timers on the grinders. We have a Mazzer Super Jolly and want to put a timer on it. Can anyone recommend where I can find one?

Thanks

Views: 199

Reply to This

Replies to This Discussion

No problem Brady. When you order try to get some fuses for it aswell. They are a little hard to find and are definatly worth having on hand.

What kind of grinder are you converting? There may be better options if you are going to convert to doserless, as these only adjust to full second increments and thus not giving an acurate dose (to the 1/10g, i'd say +/- 1 full gram at least on these) They do however make grinding for each shot quicker and easier as well as drastically reducing waste.
Brady said:
Jesse -D-> said:
Sorry I took so long to reply. No assembly required!
http://www.waringproducts.com/lab/parts/?cat_id=12
Apparently not many people are selling theese, but here is what i was talking about. The double sells for around $120 and the single for around $80

Donna said:
Hi Jesse,
Any idea where I can get one from?



Jesse -D-> said:
Waring make a nice external timer that you can run 2 grinders off of.

Very nice. Thanks for posting JD. Installation time 30 seconds? So I'm pondering a doserless conversion and one of these. Sounds like massive waste reduction potential for under $200?
Hmmm... that's probably not fine enough. Oh well, the uber-cheap SJ conversion was a fun dream for a few minutes at least. Might still be useful to reduce waste. Something to ponder.
In my opinion it reduces waste aswell as giving you the opportunity to be more efficient (it allows you to do somthing while grinding and you don't have to worry about forgetting to shut off the grinder)

Brady said:
Hmmm... that's probably not fine enough. Oh well, the uber-cheap SJ conversion was a fun dream for a few minutes at least. Might still be useful to reduce waste. Something to ponder.
Hi All,
I appreciate all the input. The timer needs to operate at a tenth of a second intervals. The waring only goes by the second. The waste is dramatically reduced, that coupled with the dosing consistency between baristas is what I'm trying to achieve. I found a model by GraLab, the 450 which operates 2 grinders but it's going for about $180. I'm trying to find a less expensive option.

Keep the ideas coming!
Donna
Can you post a link to that timer? IT sounds like somthing that might improve our situation.

Donna said:
Hi All,
I appreciate all the input. The timer needs to operate at a tenth of a second intervals. The waring only goes by the second. The waste is dramatically reduced, that coupled with the dosing consistency between baristas is what I'm trying to achieve. I found a model by GraLab, the 450 which operates 2 grinders but it's going for about $180. I'm trying to find a less expensive option.

Keep the ideas coming!
Donna
GraLab Timing Devices - Model 450 Electronic Timer Product Details - electromechanical and electronic timers . if this doesn't work, go to gralab.com and select photography at the top then search model 450.

Donna
$90 per grinder to control two grinders at 0.1 second resolution timed grind cycle too spendy? Highly doubt you'll find a plug-n-play solution for less, unless buying used off eBay etc.

If you build your own 555 timer circuit solution yes you could do it for less.

Donna said:
Hi All,
I appreciate all the input. The timer needs to operate at a tenth of a second intervals. The waring only goes by the second. The waste is dramatically reduced, that coupled with the dosing consistency between baristas is what I'm trying to achieve. I found a model by GraLab, the 450 which operates 2 grinders but it's going for about $180. I'm trying to find a less expensive option.

Keep the ideas coming!
Donna
Thanks Mike,
It's 90 per grinder as the cost is 180 but you certainly put it in good perspective.
http://cgi.ebay.com/GRALAB-450-Electronic-Timer_W0QQitemZ2003112415...|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

49 bucks it looks much better than the waring
since we are on the topic of timmers what kind of waring is in this vid? it has 4 places unless one is min??


http://www.youtube.com/watch?v=LdNJgRHtAsU
"Tamper Dance" hell yeah. That is our roaster Coleen and some of our baristas. THe timer is the same as the one listed in this thread. On page 1

Thanks for the link Donna.


Bill Warnock said:
since we are on the topic of timmers what kind of waring is in this vid? it has 4 places unless one is min??


http://www.youtube.com/watch?v=LdNJgRHtAsU
Has anyone used the GRalab timer? IT looks like it might break kind of easily. Photo equipment isn't really that durable in my experience.

Reply to Discussion

RSS

Barista Exchange Partners

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2024   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service