I've got a client who brews 1.5 gal of fresh roasted coffee at a time using a Bunn automatic brewer. They constantly run into problems with the coffee grounds running over the brew basket. I've been grinding the coffee to a drip grind, is that the correct grind? Any help on this subject would be great.

 

Thanks!

Views: 247

Reply to This

Replies to This Discussion

Tell them to set the brewer for a longer bloom time or to use the bypass feature on the brewer.  Either should fix the problem.

I agree with Zack if it's a new-ish brewer: pre-infusion is what they'd be calling the bloom time on all the digital Bunns I'm familiar with, and by-pass (up to maybe 30% max) is a good idea on 1 or 1.5 gallon batches.  You could also use pulse-brew to spread out the brew time, depending on what kind of contact time you've got going now.  You can get away with slightly longer contact times on super-fresh coffee because the de-gassing is slowing down the extraction process, but you still don't want to go too crazy with long pulse-brew cycles.

If it's not a new-ish brewer with digital programming, there's not nearly as much you can do - mostly play with mechanical bypass settings and/or try a coarser grind (in my previous job I got to play with digital recipes all the time, but in my new job it's nothing but old mechanical machines so I've had to learn to do the best I can with limited resources.)  As for the grind, consider your contact time - if the water gets through the grounds in 3-5 minutes, you definitely want to stick with the drip grind, but if it's taking 6-10 minutes like a lot of the old Bunn Duals do for 1.5 gallon batches, then a coarser (approaching french-press or percolator) grind is more appropriate in order to avoid over-extraction and will also allow the water to pass through more quickly. 

It's a delicate balancing act no matter which you go and ultimately you have to trust your taste-buds to judge any adjustments you make to the brewing method.

Great Post Eric

Eric Schaefer said:

I agree with Zack if it's a new-ish brewer: pre-infusion is what they'd be calling the bloom time on all the digital Bunns I'm familiar with, and by-pass (up to maybe 30% max) is a good idea on 1 or 1.5 gallon batches.  You could also use pulse-brew to spread out the brew time, depending on what kind of contact time you've got going now.  You can get away with slightly longer contact times on super-fresh coffee because the de-gassing is slowing down the extraction process, but you still don't want to go too crazy with long pulse-brew cycles.

If it's not a new-ish brewer with digital programming, there's not nearly as much you can do - mostly play with mechanical bypass settings and/or try a coarser grind (in my previous job I got to play with digital recipes all the time, but in my new job it's nothing but old mechanical machines so I've had to learn to do the best I can with limited resources.)  As for the grind, consider your contact time - if the water gets through the grounds in 3-5 minutes, you definitely want to stick with the drip grind, but if it's taking 6-10 minutes like a lot of the old Bunn Duals do for 1.5 gallon batches, then a coarser (approaching french-press or percolator) grind is more appropriate in order to avoid over-extraction and will also allow the water to pass through more quickly. 

It's a delicate balancing act no matter which you go and ultimately you have to trust your taste-buds to judge any adjustments you make to the brewing method.

Reply to Discussion

RSS

Barista Exchange Partners

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2024   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service