Yup!! My beloved GS-1 is for sale. Come on, you geeks...where are you? This machine is gorgeous! Will someone please break from the herd before I change my mind!

Here is a rundown:

This is a rarely seen 1989 GS-1 Single Group Solenoid unit and is in fine condition with no need whatsoever for restoration. It has been modified with several improvements to accomplish stable precision thermal control of brewing water during shot delivery. The modifications were done in such a way as to make them easily reversible to return the unit to its fully original state, should that be desired by a collector. There is no rust, corrosion, or crud anywhere and all functions perform perfectly. The group chrome has no dents or scars, the stainless steel panels and the handsome black wrinkle-paint side panels and frame are in great, near perfect condition. Aside from additions required to implement the control electronics, the wiring is the original cloth-insulated and is all in perfect condition. It has a whimsical cup heater which delivers a puff of steam to the cup storage tray on command, as though it's not warm enough up there already!

A pre-heat tank has been added which feeds the original brew tank environment. This third tank is controlled by a mechanical thermostat located in a thermowell and it supplies water elevated to ~204 F to the brew tank. The third tank modification was fabricated and installed by La Marzocco when located in the Ballard district in Seattle in around 2001.

An Omega Micromega CN77000 series auto-tuning temperature controller uses a PID algorithm to exact thermal control over the original brew tank. The Micromega drives an Omega Solid State Relay which modulates power to the brew heating element. The machine has an exceptionally tidy and solid electronics integration with an elegant custom made fan-ventilated stainless steel module holding the splashproofed Omega controller. The extra tank is slung back under the steam tank. The Micromega module hangs back under the left frame rail, easily visible but out of harm's way both thermally and operationally. The pre-heat tank also has a J thermocouple installed for tuning that tank's temperature using a Fluke or other external instrument. That thermocouple could inform a second PID loop if a two-channel controller were installed in place of the single channel Omega.

This is a rare and beautiful La Marzocco machine that played a significant role in researching the importance of temperature stability during shot extraction.

If I were keeping this machine I think I would add another modification that would place an on-delay timer before the pump so that when the brew switch was closed there would be a period during which the solenoid flowed water under only mains pressure to gently wet the coffee load. Then, some few seconds later, the timer would turn on the pump to deliver full extraction pressure. This would bring the machine into the realm of current state of the art in terms of pre-infusion versatility. Also, pressure profiling could be accomplished with a bit of thought and some pump hardware. This would advance the unit another step and place it abreast of certain other machines used in experiments at the frontier of espresso extraction research in the labs of Synesso, La Marzocco, Slayer, and a small number of independent workers around the world. The machine is poised to be a very solid experimental testbed, if so desired.

Comparitively few of the GS-1 Single Group machines were produced by La Marzocco. I should mention that I also have available a Paddle Group neck w/o the brass valve components - just the chrome plated neck. With effort, one could find the necessary valve components and convert this machine into a manual Paddle Group unit. It's potentially a convertible!!

LOTS OF PHOTOS HERE: http://flickr.com/gp/29800684@N07/4h9S3z

This is a trouble-free machine for the hardware aficionato who would appreciate a rare and handsome example from the golden years of La Marzocco innovation and accomplishment, but who would also appreciate state of the art control of water and the very real potential for doing interesting experiments in espresso extraction technology.

$4500 I invite discussion.

Views: 2541

Attachments:

Reply to This

Replies to This Discussion

i don't blame you... after hearing the history behind this piece, it's not an unreasonable price to pay. Quite an amazing little machine. Hope it finds a home where it is appreciated and cared for.

Terry Z said:
Oh I'm just guessing, but knowing the price that Barry is currently asking and where he started, I would say the offer is less than Barry would settle for, I know if it were mine ;-) that's how it would go down.



Chris DeMarse said:
I am assuming by your response, Terry, that this machines value is not up for discussion, or am I misreading you?

Terry Z said:
Thats funny. I think you misunderstand Barry's situation.
The current "Classifieds" listing of this machine contains info regarding the unusual provenance of my GS-1. I'm repeating that info here in case it's a factor to someone contemplating taking the plunge.

For those of you interested in provenance, this machine originally belonged to David Schomer of Espresso Vivace in Seattle and was used in his home kitchen after he developed the control parameters for his prototype PID-governed Linea. That original Linea still chugs out superb shots for personnel who work in David's roaster warehouse. The control logic and design modifications of that Linea were ultimately migrated to Dave's production machines in his cafes, as well as to this little performer which was to live at his home. This GS-1 chugs out superb shots just like its larger sibling.

Barry H.
Barry,

That's a magnificent machine and a magnificent piece of work on your part. I would consider buying it to display as a "before and after" with my GS/3, but it would only confirm what friends and family think about my sanity.

I hope you won't mind that I took the liberty of saving your wonderful photos for personal reference.

Have you considered offering this piece of history to Enrico Maltoni?

Marshall
buy a gs3 if you dont know the nostalgia of a machine like this BTW the gs3's just came down in price and you can have your paddle.

barry nice machine might have jumped on it but i just got a 2010 STI im waiting for someone that has a 2-3grp that might trade for my vintage victoria arduino.

Chris DeMarse said:
I am assuming by your response, Terry, that this machines value is not up for discussion, or am I misreading you?

Terry Z said:
Thats funny. I think you misunderstand Barry's situation.

Reply to Discussion

RSS

Barista Exchange Partners

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2021   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service