Hey there !!

We have our 3 group La Marzocco in the garage patiently waiting for "practice sessions"

but we are still attempting to correctly connect to the water source. We have a 5 gallon

container will water, we've purchased the "flowjet" but we can't figure out to attach

the water hose from pump to the flowjet, any help? I see an attachment on the side of

the flowjet, so there must be a threaded attachment that I need in order to connect it?

Thank you,

Kim

Views: 86

Attachments:

Replies are closed for this discussion.

Replies to This Discussion

Do you have the one for a 5gal bottle. If you do use 1/4 line it is a push in fit. then use a fitting to the machine.
We do have the one for the 5 gallon. But the white hose that comes w/ seems too small?
I guess my ? is, "how do I connect the braided water hose from my pump, directly to the flowjet?"
Use the white line and buy a brass fitting from a hardware store not to hard just ask them and they will help the white line is what they call plex you can use a compresson fitting to a 3/8 male it should fit the braided water hose.
Thanks Tom!!
yw
Just an FYI don't be alarmed if shots are weird, a Flojet used by itself will result in a pulsing shot. I use this accumulator between Flojet and pump when catering for steady water pressure.
That good to know when we do catering we use a pour over.

Mike McGinness said:
Just an FYI don't be alarmed if shots are weird, a Flojet used by itself will result in a pulsing shot. I use this accumulator between Flojet and pump when catering for steady water pressure.

RSS

Barista Exchange Partners

Barista Exchange Friends

Keep Barista Exchange Free

Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!

Clicky Web Analytics

© 2022   Created by Matt Milletto.   Powered by

Badges  |  Report an Issue  |  Terms of Service