La Pavoni lever machines - Barista Exchange2024-03-29T11:56:13Zhttps://www.baristaexchange.com/forum/topics/la-pavoni-lever-machines?commentId=1688216%3AComment%3A1173022&feed=yes&xn_auth=no
I'm sure the above reply me…tag:www.baristaexchange.com,2011-06-18:1688216:Comment:11730222011-06-18T20:10:35.507ZChad Christensenhttps://www.baristaexchange.com/profile/ChadChristensen
<p> </p>
<p>I'm sure the above reply meant to say that the La Pavoni Professional has a 16 cup capacity to the Europiccola's 8 cup capacity.</p>
<p> </p>
<p>The Professional's pressurestat feature makes it a little better mannered than the Europiccola, which hisses quite a bit because there is always voltage going to the element when it is on. The older EP has a two or three position switch that gives a high and low wattage option (Off as a third option on the mid-late '70's design) that must…</p>
<p> </p>
<p>I'm sure the above reply meant to say that the La Pavoni Professional has a 16 cup capacity to the Europiccola's 8 cup capacity.</p>
<p> </p>
<p>The Professional's pressurestat feature makes it a little better mannered than the Europiccola, which hisses quite a bit because there is always voltage going to the element when it is on. The older EP has a two or three position switch that gives a high and low wattage option (Off as a third option on the mid-late '70's design) that must be skillfully toggled at the right times to get the best results (or so it seems to me. "I" statements are very appropriate for something as manual & quirky as these machines).</p>
<p> </p>
<p>I believe the later EP model is able to kep track of its own wattage/voltage, using a two position (on/off) switch. I've only messed with one of them, and it was a long time ago...</p>
<p> </p>
<p>The ability to adjust the pressurestat of the Pro model is nice, and it's easy to do. It's capacity is also a plus. The grouphead of the EP and the Pro is the same. The gauge on the Pro is approximate at best.</p>
<p> </p>
<p>The EP model (and to an extent the Pro model as well) has a tendency to overheat. I (I) drizzle just enough water over the group to where the machine stops hissing. This gives me a noticeably better result in the cup.</p>
<p> </p>
<p>I've rebuilt a handful of them, and they're enough to keep you interested, while not being mind blowing to tear down and assemble again when you're done. Some of the switches and the rubber base of the older models are no longer available. My butane powered EP will debut sometime in the Fall...</p>
<p> </p>
<p>I use two different Europiccolas regularly at my house and at my girlfriend's house. I love them, but they require more from the operator than any other machine that I know of. Good results are hard-won, but when you get good at it you are the F-ing MAN!</p> Actually depends on what is n…tag:www.baristaexchange.com,2011-06-18:1688216:Comment:11721392011-06-18T14:00:25.658ZShadowhttps://www.baristaexchange.com/profile/Shadow
Actually depends on what is needed. There are lots of parts available, but the supply/demand drives the price up considerably. With the exception of replacing gaskets/seals once in a blue moon, there's not alot that can really go wrong on a Cremina if simple preventive maintenance is done.<br/><cite>Peter Milne said:</cite>
<blockquote><div>Also, I understand Cremina parts are pretty hard to come by?</div>
</blockquote>
Actually depends on what is needed. There are lots of parts available, but the supply/demand drives the price up considerably. With the exception of replacing gaskets/seals once in a blue moon, there's not alot that can really go wrong on a Cremina if simple preventive maintenance is done.<br/><cite>Peter Milne said:</cite>
<blockquote><div>Also, I understand Cremina parts are pretty hard to come by?</div>
</blockquote> Thanks, got one....ready to g…tag:www.baristaexchange.com,2011-06-17:1688216:Comment:11715262011-06-17T14:52:36.820ZPeter Milnehttps://www.baristaexchange.com/profile/PeterMilne
Thanks, got one....ready to go now!
Thanks, got one....ready to go now! The Euro has a 8 cup capacity…tag:www.baristaexchange.com,2011-06-17:1688216:Comment:11715182011-06-17T13:41:26.351ZBasil Whitenerhttps://www.baristaexchange.com/profile/BasilWhitener
The Euro has a 8 cup capacity<br />
The Pro has a 6 cup capacity and pressure gauge<br />
Not sure what capacity the more stylized Strat has<br />
For capacity rating the cups referred to are 2oz.<br />
There is a wealth of information on the Internet parts are available from orphan espresso and others.<br />
Good luck with your lever.
The Euro has a 8 cup capacity<br />
The Pro has a 6 cup capacity and pressure gauge<br />
Not sure what capacity the more stylized Strat has<br />
For capacity rating the cups referred to are 2oz.<br />
There is a wealth of information on the Internet parts are available from orphan espresso and others.<br />
Good luck with your lever. Also, I understand Cremina pa…tag:www.baristaexchange.com,2011-06-17:1688216:Comment:11707392011-06-17T00:04:13.782ZPeter Milnehttps://www.baristaexchange.com/profile/PeterMilne
Also, I understand Cremina parts are pretty hard to come by?
Also, I understand Cremina parts are pretty hard to come by? Well, I was speaking new of c…tag:www.baristaexchange.com,2011-06-16:1688216:Comment:11708162011-06-16T21:12:22.540ZPeter Milnehttps://www.baristaexchange.com/profile/PeterMilne
Well, I was speaking new of course. We dont have yard sales like that here.
Well, I was speaking new of course. We dont have yard sales like that here. Depends on what you call twic…tag:www.baristaexchange.com,2011-06-16:1688216:Comment:11703772011-06-16T21:09:52.049ZShadowhttps://www.baristaexchange.com/profile/Shadow
Depends on what you call twice the price. Mine was initially purchased at a yard sale for $3. Of course it was in poor shape/extremely dirty and ended up being my first machine rebuild, but it's going on 35 years old and works as good as ever. Still using the original pressurestat too! You're paying for performance, simplicity and build quality with the brand.
Depends on what you call twice the price. Mine was initially purchased at a yard sale for $3. Of course it was in poor shape/extremely dirty and ended up being my first machine rebuild, but it's going on 35 years old and works as good as ever. Still using the original pressurestat too! You're paying for performance, simplicity and build quality with the brand. For twice the price it ought…tag:www.baristaexchange.com,2011-06-16:1688216:Comment:11703692011-06-16T20:59:10.099ZPeter Milnehttps://www.baristaexchange.com/profile/PeterMilne
For twice the price it ought to be top dawg.
For twice the price it ought to be top dawg. How about neither... I'm a bi…tag:www.baristaexchange.com,2011-06-16:1688216:Comment:11704692011-06-16T20:26:03.146ZShadowhttps://www.baristaexchange.com/profile/Shadow
<p>How about neither... I'm a bit partial to the mighty Olympia Cremina. It's considered the Top Dawg among "home" levers for a reason. I acquired mine through alot of blood, sweat and tears.</p>
<p>Seriously, there's alot of info on the Pavonis, ask around/search over at Home-Barista. There are differences in those models, but I know little about them. They have their following as well.</p>
<p> </p>
<p> </p>
<p>How about neither... I'm a bit partial to the mighty Olympia Cremina. It's considered the Top Dawg among "home" levers for a reason. I acquired mine through alot of blood, sweat and tears.</p>
<p>Seriously, there's alot of info on the Pavonis, ask around/search over at Home-Barista. There are differences in those models, but I know little about them. They have their following as well.</p>
<p> </p>
<p> </p>