Grinder Help - Barista Exchange2024-03-28T19:57:25Zhttps://www.baristaexchange.com/forum/topics/grinder-help?feed=yes&xn_auth=noFrom my experience (I'm a pro…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8957902010-08-04T21:00:38.702ZJoona Suominenhttps://www.baristaexchange.com/profile/JoonaSuominen
From my experience (I'm a proud owner of a sc, using robur-e every day at work, spent hours with compak) all of them are excellent grinders but I think some of your criticism against anfim is a little harsh :)<br />
<br />
Allthough the grind quality might have been a secondary feature, it's absolutely no problem with anfim. I'd say the coffee ground with SC is fluffier than with k10 or robur (all tested within the same room, similar temperature, same coffee, ceteris paribus :))<br />
<br />
When it comes to conical…
From my experience (I'm a proud owner of a sc, using robur-e every day at work, spent hours with compak) all of them are excellent grinders but I think some of your criticism against anfim is a little harsh :)<br />
<br />
Allthough the grind quality might have been a secondary feature, it's absolutely no problem with anfim. I'd say the coffee ground with SC is fluffier than with k10 or robur (all tested within the same room, similar temperature, same coffee, ceteris paribus :))<br />
<br />
When it comes to conical vs. flat burr-debate, the differences between the burr set-types get lost in the differences between grinders. I can't understand how conical burrs were somehow more consistent? The conical burrs are usually cheered because they produce more fine particles and according to S. Rao and D. Schoemer that does not contribute to consistency between shots.<br />
<br />
The Anfim does use steps but the step interval has been decreased on the latest models and there's about 90 points now. It's a compromise, yes, but not a big one. The stepped mechanism on the Anfims should not be compared with k30 (used one before robur). Besides I personally find it easier to loosen or tighten the grind with one step instead of plain inaccurate "just a little bit".<br />
<br />
Although the "White paper" on the coffeed was a little bit Steve Jobbish solution it's concerns all the timed grinders to some degree. There's a correlation between grind speed and grind size (I tested this few weeks ago, p<.05), so when in need of a fast adjustments timers are the solution.<br />
<br />
Other points that never get mentioned are the size of the SC: it's easy to pack and carry to places and when the doser and doser fork are removed, it's delightfully small and compact. Where I'm from, the Anfim was also cheapest of the bunch. The whole burr carrier is made out of a heavy block of bronze (I think the upper carrier is heavier than on robur) and it's thermal conductivity is low. That together with the ventilation means that in modest use, the anfim is one cool grinder.<br />
<br />
Allthough I'm a die hard Anfim-lover, those three grinders are still just about the best one can get.<br />
<br />
<cite>Jay Caragay said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help?id=1688216%3ATopic%3A827540&page=2#1688216Comment895552"><div>Ryan-<br/> I see that I'm late to the game but I did not see the post when it originally was posted, only now.<br/>
<br/>
Whomever told you that the Compak K-10WBC is "cheap, plastic trash" is someone who is ignorant of the grinder, and I don't care how "well respected" you say this person is - in fact, tell us this persons name so I can respect that person less.<br/>
<br/>
I've been using the Compak K-10 since 2006 and it has been a workhorse. It quickly replaced our Mazzer Majors as our "primary" grinder and I specified the K-10 WBC for the new Spro Hampden that we opened this past March as our primary grinder. The K-10 is a hardworking, reliable and proven performer that's not quite "loved" by some of these "well respected" "professionals" because they're pushing some other grinder that they think is "hip."<br/>
<br/>
I care less about "hip" and "cool" and more about quality of grind, reliability, performance and consistency.<br/>
<br/>
The other grinder you mentioned (Anfim Super Caimano) deserves a little bit of history for you to appreciate it's position within our craft today. Clean dosing has always been an issue in a shop environment, but dosing really came to the forefront at the WBC/USBC. Specifically, the problem of the Mazzers to "throw" ground coffee to the left and spilling onto the counter - which results in more work and burning more time, or lower scores in competition.<br/>
<br/>
Competitive baristas back in 2004-2005 were looking for a grinder that would eliminate the dosing "problem" - enter the Anfim. I believe it was Philip Search (the guy who really pushed for grinder timer development) and Vince Piccolo who discovered that the Anfim doser dropped the coffee straight down - eliminating many of the dosing problems.<br/>
<br/>
In other words, the Anfim only came to light because of it's doser. It was never a contender because of grind quality - grind quality was secondary.<br/>
<br/>
While all grinders are compromised, the Anfim is more compromised than others. 1) it uses flat burrs as opposed to the greater consistency conical burrs like those found in a K-10, 2) it uses stepped grind settings. The first compromise isn't too bad. I've used and liked Mazzer Major grinders for years. However, the second problem is one that completely eliminates the grinder from consideration.<br/>
<br/>
Quite simply, Stepped Grind Adjustment is INFERIOR to the "infinite" friction adjusters found on the Compak and Mazzer grinders. Invariably, the grind you need will be exactly the point BETWEEN grinder steps. It is why there was such a backlash when Mahlkonig introduced the K30 - eventually, they had to relent and modify the K30 to friction adjust.<br/>
<br/>
A few years ago, Philip Search posted to Coffeed.com what I joking call his "white paper" - a diatribe defending the Anfim against critics (like myself), giving reasons why the Anfim was superior to all grinders and why the stepped grinder was not only not a problem but better than other grinders. He argued that the stepped adjust was not a problem because you could simply adjust the grinder timer plus or minus to compensate. In other words, his argument was that you could simply use a little more or a little less coffee to compensate for the problem.<br/>
<br/>
This was the most laughable thing I have ever read in my eight years in this industry. Ludicrous comes to mind. Evolution brought us away from stepped adjustment and this guy is trying to tell us that it's better. Ridiculous and a complete load of BS. Bottom line: all grinders are compromised in some way. The point is that we need to understand those compromises, work around them and continue to improve. The Anfim hasn't improved its' design since 49th Parallel introduced it to the marketplace (the K30 quickly changed to friction). To my mind, the Anfim is the poor choice. Better off with a Mazzer Major than the Anfim.</div>
</blockquote> Yes,
No offense taken Jay. I'…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8956842010-08-04T19:16:37.304ZJoseph Robertsonhttps://www.baristaexchange.com/profile/JosephRobertson
Yes,<br />
No offense taken Jay. I'm only a fan because I don't have the ready $ for the grinders you mention.<br />
I would not be surprised if titanium burr sets were not just specific to the SJ Mazzer. They cost about $80 instead of around $40 for standard. Metallurgy was a major in college so I do know some of the advantages of using titanium over hardened steal. Just not sure if you get twice the millage in the coffee grinder world.<br />
Joe<br />
<br />
<cite>Jay Caragay said:…</cite>
Yes,<br />
No offense taken Jay. I'm only a fan because I don't have the ready $ for the grinders you mention.<br />
I would not be surprised if titanium burr sets were not just specific to the SJ Mazzer. They cost about $80 instead of around $40 for standard. Metallurgy was a major in college so I do know some of the advantages of using titanium over hardened steal. Just not sure if you get twice the millage in the coffee grinder world.<br />
Joe<br />
<br />
<cite>Jay Caragay said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help?commentId=1688216%3AComment%3A895606&xg_source=msg_com_forum#1688216Comment895606"><div>Joseph-<br/> I do not have any experience with Mazzer SJ Titanium Burrs. My only understanding is that the titanium should last longer. However, I presume the titanium burrs come at a premium. Perhaps that extra cash is better spent towards a new grinder? No offense, but I'm really not a fan of the Super Jolly in a production environment. The size of the burrs creates greater heat friction and I prefer the grind quality out of a Major or Robur over the Super Jolly.</div>
</blockquote> Joseph-
I do not have any exp…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8956062010-08-04T17:20:51.265ZJay Caragayhttps://www.baristaexchange.com/profile/JayCaragay
Joseph-<br />
I do not have any experience with Mazzer SJ Titanium Burrs. My only understanding is that the titanium should last longer. However, I presume the titanium burrs come at a premium. Perhaps that extra cash is better spent towards a new grinder? No offense, but I'm really not a fan of the Super Jolly in a production environment. The size of the burrs creates greater heat friction and I prefer the grind quality out of a Major or Robur over the Super Jolly.
Joseph-<br />
I do not have any experience with Mazzer SJ Titanium Burrs. My only understanding is that the titanium should last longer. However, I presume the titanium burrs come at a premium. Perhaps that extra cash is better spent towards a new grinder? No offense, but I'm really not a fan of the Super Jolly in a production environment. The size of the burrs creates greater heat friction and I prefer the grind quality out of a Major or Robur over the Super Jolly. +10 :-)
Jay Caragay said:A fe…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8955712010-08-04T16:13:40.451ZMike McGinnesshttps://www.baristaexchange.com/profile/miKemcKoffeeakaMikeMcGinness
+10 :-)<br />
<cite>Jay Caragay said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help?x=1&id=1688216%3ATopic%3A827540&page=2#1688216Comment895552"><div><br></br><br></br>A few years ago, Philip Search posted to Coffeed.com what I joking call his "white paper" - a diatribe defending the Anfim against critics (like myself), giving reasons why the Anfim was superior to all grinders and why the stepped grinder was not only not a problem but better than other grinders. He…</div>
</blockquote>
+10 :-)<br />
<cite>Jay Caragay said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help?x=1&id=1688216%3ATopic%3A827540&page=2#1688216Comment895552"><div><br/><br/>A few years ago, Philip Search posted to Coffeed.com what I joking call his "white paper" - a diatribe defending the Anfim against critics (like myself), giving reasons why the Anfim was superior to all grinders and why the stepped grinder was not only not a problem but better than other grinders. He argued that the stepped adjust was not a problem because you could simply adjust the grinder timer plus or minus to compensate. In other words, his argument was that you could simply use a little more or a little less coffee to compensate for the problem.<br/><br/>This was the most laughable thing I have ever read in my eight years in this industry. Ludicrous comes to mind. Evolution brought us away from stepped adjustment and this guy is trying to tell us that it's better. Ridiculous and a complete load of BS. Bottom line: all grinders are compromised in some way. The point is that we need to understand those compromises, work around them and continue to improve. The Anfim hasn't improved its' design since 49th Parallel introduced it to the marketplace (the K30 quickly changed to friction). To my mind, the Anfim is the poor choice. Better off with a Mazzer Major than the Anfim.</div>
</blockquote> Jay,
Thank you for sharing yo…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8955672010-08-04T16:08:09.941ZJoseph Robertsonhttps://www.baristaexchange.com/profile/JosephRobertson
Jay,<br />
Thank you for sharing your history and experience here on this topic. Aside from many other shop factors and element being in place, I believe the grinder is the single most important tool I have in our shop.<br />
Jay, do you have any experience with Mazzer SJ Titanium burrs?<br />
I will be buying new burrs soon and just wonder if you get extra miles for the extra cost.<br />
Joe<br />
<br />
<cite>Jay Caragay said:…</cite>
Jay,<br />
Thank you for sharing your history and experience here on this topic. Aside from many other shop factors and element being in place, I believe the grinder is the single most important tool I have in our shop.<br />
Jay, do you have any experience with Mazzer SJ Titanium burrs?<br />
I will be buying new burrs soon and just wonder if you get extra miles for the extra cost.<br />
Joe<br />
<br />
<cite>Jay Caragay said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help?id=1688216%3ATopic%3A827540&page=2#1688216Comment895552"><div>Ryan-<br/> I see that I'm late to the game but I did not see the post when it originally was posted, only now.<br/>
<br/>
Whomever told you that the Compak K-10WBC is "cheap, plastic trash" is someone who is ignorant of the grinder, and I don't care how "well respected" you say this person is - in fact, tell us this persons name so I can respect that person less.<br/>
<br/>
I've been using the Compak K-10 since 2006 and it has been a workhorse. It quickly replaced our Mazzer Majors as our "primary" grinder and I specified the K-10 WBC for the new Spro Hampden that we opened this past March as our primary grinder. The K-10 is a hardworking, reliable and proven performer that's not quite "loved" by some of these "well respected" "professionals" because they're pushing some other grinder that they think is "hip."<br/>
<br/>
I care less about "hip" and "cool" and more about quality of grind, reliability, performance and consistency.<br/>
<br/>
The other grinder you mentioned (Anfim Super Caimano) deserves a little bit of history for you to appreciate it's position within our craft today. Clean dosing has always been an issue in a shop environment, but dosing really came to the forefront at the WBC/USBC. Specifically, the problem of the Mazzers to "throw" ground coffee to the left and spilling onto the counter - which results in more work and burning more time, or lower scores in competition.<br/>
<br/>
Competitive baristas back in 2004-2005 were looking for a grinder that would eliminate the dosing "problem" - enter the Anfim. I believe it was Philip Search (the guy who really pushed for grinder timer development) and Vince Piccolo who discovered that the Anfim doser dropped the coffee straight down - eliminating many of the dosing problems.<br/>
<br/>
In other words, the Anfim only came to light because of it's doser. It was never a contender because of grind quality - grind quality was secondary.<br/>
<br/>
While all grinders are compromised, the Anfim is more compromised than others. 1) it uses flat burrs as opposed to the greater consistency conical burrs like those found in a K-10, 2) it uses stepped grind settings. The first compromise isn't too bad. I've used and liked Mazzer Major grinders for years. However, the second problem is one that completely eliminates the grinder from consideration.<br/>
<br/>
Quite simply, Stepped Grind Adjustment is INFERIOR to the "infinite" friction adjusters found on the Compak and Mazzer grinders. Invariably, the grind you need will be exactly the point BETWEEN grinder steps. It is why there was such a backlash when Mahlkonig introduced the K30 - eventually, they had to relent and modify the K30 to friction adjust.<br/>
<br/>
A few years ago, Philip Search posted to Coffeed.com what I joking call his "white paper" - a diatribe defending the Anfim against critics (like myself), giving reasons why the Anfim was superior to all grinders and why the stepped grinder was not only not a problem but better than other grinders. He argued that the stepped adjust was not a problem because you could simply adjust the grinder timer plus or minus to compensate. In other words, his argument was that you could simply use a little more or a little less coffee to compensate for the problem.<br/>
<br/>
This was the most laughable thing I have ever read in my eight years in this industry. Ludicrous comes to mind. Evolution brought us away from stepped adjustment and this guy is trying to tell us that it's better. Ridiculous and a complete load of BS. Bottom line: all grinders are compromised in some way. The point is that we need to understand those compromises, work around them and continue to improve. The Anfim hasn't improved its' design since 49th Parallel introduced it to the marketplace (the K30 quickly changed to friction). To my mind, the Anfim is the poor choice. Better off with a Mazzer Major than the Anfim.</div>
</blockquote> Ryan-
I see that I'm late to…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8955522010-08-04T15:55:00.090ZJay Caragayhttps://www.baristaexchange.com/profile/JayCaragay
Ryan-<br />
I see that I'm late to the game but I did not see the post when it originally was posted, only now.<br />
<br />
Whomever told you that the Compak K-10WBC is "cheap, plastic trash" is someone who is ignorant of the grinder, and I don't care how "well respected" you say this person is - in fact, tell us this persons name so I can respect that person less.<br />
<br />
I've been using the Compak K-10 since 2006 and it has been a workhorse. It quickly replaced our Mazzer Majors as our "primary" grinder and I…
Ryan-<br />
I see that I'm late to the game but I did not see the post when it originally was posted, only now.<br />
<br />
Whomever told you that the Compak K-10WBC is "cheap, plastic trash" is someone who is ignorant of the grinder, and I don't care how "well respected" you say this person is - in fact, tell us this persons name so I can respect that person less.<br />
<br />
I've been using the Compak K-10 since 2006 and it has been a workhorse. It quickly replaced our Mazzer Majors as our "primary" grinder and I specified the K-10 WBC for the new Spro Hampden that we opened this past March as our primary grinder. The K-10 is a hardworking, reliable and proven performer that's not quite "loved" by some of these "well respected" "professionals" because they're pushing some other grinder that they think is "hip."<br />
<br />
I care less about "hip" and "cool" and more about quality of grind, reliability, performance and consistency.<br />
<br />
The other grinder you mentioned (Anfim Super Caimano) deserves a little bit of history for you to appreciate it's position within our craft today. Clean dosing has always been an issue in a shop environment, but dosing really came to the forefront at the WBC/USBC. Specifically, the problem of the Mazzers to "throw" ground coffee to the left and spilling onto the counter - which results in more work and burning more time, or lower scores in competition.<br />
<br />
Competitive baristas back in 2004-2005 were looking for a grinder that would eliminate the dosing "problem" - enter the Anfim. I believe it was Philip Search (the guy who really pushed for grinder timer development) and Vince Piccolo who discovered that the Anfim doser dropped the coffee straight down - eliminating many of the dosing problems.<br />
<br />
In other words, the Anfim only came to light because of it's doser. It was never a contender because of grind quality - grind quality was secondary.<br />
<br />
While all grinders are compromised, the Anfim is more compromised than others. 1) it uses flat burrs as opposed to the greater consistency conical burrs like those found in a K-10, 2) it uses stepped grind settings. The first compromise isn't too bad. I've used and liked Mazzer Major grinders for years. However, the second problem is one that completely eliminates the grinder from consideration.<br />
<br />
Quite simply, Stepped Grind Adjustment is INFERIOR to the "infinite" friction adjusters found on the Compak and Mazzer grinders. Invariably, the grind you need will be exactly the point BETWEEN grinder steps. It is why there was such a backlash when Mahlkonig introduced the K30 - eventually, they had to relent and modify the K30 to friction adjust.<br />
<br />
A few years ago, Philip Search posted to Coffeed.com what I joking call his "white paper" - a diatribe defending the Anfim against critics (like myself), giving reasons why the Anfim was superior to all grinders and why the stepped grinder was not only not a problem but better than other grinders. He argued that the stepped adjust was not a problem because you could simply adjust the grinder timer plus or minus to compensate. In other words, his argument was that you could simply use a little more or a little less coffee to compensate for the problem.<br />
<br />
This was the most laughable thing I have ever read in my eight years in this industry. Ludicrous comes to mind. Evolution brought us away from stepped adjustment and this guy is trying to tell us that it's better. Ridiculous and a complete load of BS. Bottom line: all grinders are compromised in some way. The point is that we need to understand those compromises, work around them and continue to improve. The Anfim hasn't improved its' design since 49th Parallel introduced it to the marketplace (the K30 quickly changed to friction). To my mind, the Anfim is the poor choice. Better off with a Mazzer Major than the Anfim. Chris,
Since I've had my K10…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8954892010-08-04T13:55:17.029ZJackson Ballhttps://www.baristaexchange.com/profile/JacksonBall
Chris,<br />
<br />
Since I've had my K10, I've been spoiled rotten by it's amazing grind quality - so beware, I'll be the first to admit I am biased by it. I change coffee's all the time so the K30 was not a good match for me. I can single dose with my k10 which is nice, because I drink 2-3 different coffee's a day. The problems with changing coffee and keeping beans in the hopper (w/the k30) was the first big deal breaker for me as a home user. If you like to run a couple pounds of coffee straight before…
Chris,<br />
<br />
Since I've had my K10, I've been spoiled rotten by it's amazing grind quality - so beware, I'll be the first to admit I am biased by it. I change coffee's all the time so the K30 was not a good match for me. I can single dose with my k10 which is nice, because I drink 2-3 different coffee's a day. The problems with changing coffee and keeping beans in the hopper (w/the k30) was the first big deal breaker for me as a home user. If you like to run a couple pounds of coffee straight before switching, the K30 might be a great grinder for you. It is very quick, silent and efficient. Just know that it takes several pounds to break in the burrs and it likes to have beans in the hopper for it to function/dose properly. I used a dosing funnel from Orphan Espresso with my K30 and barely had a grain of coffee spill out of the porta-filter so it was very tidy when used that way. I do feel that the grind quality of the K10 is noticeably superior to the K30. I would say the grind from the k30 is better than the baratza vario, but I couldn't go back to either now that I'm used to my k10. Of course, to each his own - the k30 still makes a darn fine cup and is top notch at what it does. Hope that helps, Jackson<br />
<br />
<cite>Chris Birkett said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help#1688216Comment895315"><div>Any chance you could update the thread with your thoughts on the K30 vs. K10 for home use, Jackson? I recently picked up a Baratza Vario to use as a decaf/secondary grinder for my K10, and I was so sold on the timed aspect and lack of waste that I've pretty much used it exclusively for the last few months. I've been giving some serious thought to swapping the K10 for a K30.</div>
</blockquote> Any chance you could update t…tag:www.baristaexchange.com,2010-08-04:1688216:Comment:8953152010-08-04T02:54:40.592ZChris Birketthttps://www.baristaexchange.com/profile/ChrisBirkett
Any chance you could update the thread with your thoughts on the K30 vs. K10 for home use, Jackson? I recently picked up a Baratza Vario to use as a decaf/secondary grinder for my K10, and I was so sold on the timed aspect and lack of waste that I've pretty much used it exclusively for the last few months. I've been giving some serious thought to swapping the K10 for a K30.
Any chance you could update the thread with your thoughts on the K30 vs. K10 for home use, Jackson? I recently picked up a Baratza Vario to use as a decaf/secondary grinder for my K10, and I was so sold on the timed aspect and lack of waste that I've pretty much used it exclusively for the last few months. I've been giving some serious thought to swapping the K10 for a K30. I have a K30 WBC in my house.…tag:www.baristaexchange.com,2010-04-29:1688216:Comment:8373932010-04-29T07:39:02.627ZJackson Ballhttps://www.baristaexchange.com/profile/JacksonBall
I have a K30 WBC in my house. I have a K10 WBC being delivered tomorrow. I can give you some side by side comparison soon.<br />
<br />
<cite>Ryan Soeder said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help#1688216Comment837217"><div>Alright, I know it's been a while but I'm still in grinder decision lockdown crisis mode. I feel like a little kid having to choose which parent to live with.<br></br><br></br>I'm inclined toward the Compak and the only thing that gives me pause is…</div>
</blockquote>
I have a K30 WBC in my house. I have a K10 WBC being delivered tomorrow. I can give you some side by side comparison soon.<br />
<br />
<cite>Ryan Soeder said:</cite><blockquote cite="http://www.baristaexchange.com/forum/topics/grinder-help#1688216Comment837217"><div>Alright, I know it's been a while but I'm still in grinder decision lockdown crisis mode. I feel like a little kid having to choose which parent to live with.<br/><br/>I'm inclined toward the Compak and the only thing that gives me pause is the complete void of information regarding the "in-the-cup" results from the Anfim. I've spent countless hours reading every forum thread and article I can find about each grinder and everyone is talking about how accurate/consistent the Super Caimano is but no one seems to be talking about the "in-the-cup" results. Every now and then, someone will casually remark on how they would put it up next to the Robur but no one focuses on this.<br/><br/>Does anyone here have experience on both the Compak K10 WBC and the Anfim Super Caimano v2? The Super Caimano has a great doser and timer but if the shots it produces are generally inferior to the K10, those are niceties I'd be willing to forgo. On the other hand, if the shots are on par with one another, I'd much rather have it all in one package.<br/><br/>I could easily chalk this up to the difference between flat and conical burrs except that there are mutterings about how the Caimano burr set may act in such a way that it rivals the signature syrupy body of the big conicals.<br/><br/>Any thoughts?</div>
</blockquote> Alright, I know it's been a w…tag:www.baristaexchange.com,2010-04-29:1688216:Comment:8372172010-04-29T00:55:15.660ZRyan Soederhttps://www.baristaexchange.com/profile/RyanSoeder
Alright, I know it's been a while but I'm still in grinder decision lockdown crisis mode. I feel like a little kid having to choose which parent to live with.<br />
<br />
I'm inclined toward the Compak and the only thing that gives me pause is the complete void of information regarding the "in-the-cup" results from the Anfim. I've spent countless hours reading every forum thread and article I can find about each grinder and everyone is talking about how accurate/consistent the Super Caimano is but no one…
Alright, I know it's been a while but I'm still in grinder decision lockdown crisis mode. I feel like a little kid having to choose which parent to live with.<br />
<br />
I'm inclined toward the Compak and the only thing that gives me pause is the complete void of information regarding the "in-the-cup" results from the Anfim. I've spent countless hours reading every forum thread and article I can find about each grinder and everyone is talking about how accurate/consistent the Super Caimano is but no one seems to be talking about the "in-the-cup" results. Every now and then, someone will casually remark on how they would put it up next to the Robur but no one focuses on this.<br />
<br />
Does anyone here have experience on both the Compak K10 WBC and the Anfim Super Caimano v2? The Super Caimano has a great doser and timer but if the shots it produces are generally inferior to the K10, those are niceties I'd be willing to forgo. On the other hand, if the shots are on par with one another, I'd much rather have it all in one package.<br />
<br />
I could easily chalk this up to the difference between flat and conical burrs except that there are mutterings about how the Caimano burr set may act in such a way that it rivals the signature syrupy body of the big conicals.<br />
<br />
Any thoughts?