the world's premiere online community for the specialty coffee industry
Mazzer digital timer mod.
I'm exploring my options for installing this mod on some of our Mazzer SJ's. Does anyone have any experience with this? Is there a DIY kit?
The biggest reasons for this would be to eliminate waste and improve dosing consistency between different baristas.
The biggest reasons for this would be to eliminate waste and improve dosing consistency between different baristas.
Replies to This Discussion
-
Permalink Reply by Eric Tissot on -
Hey man!
Check out this discussion:
http://www.baristaexchange.com/forum/topics/external-grinder-timer?...
There is actually quite a bit of room under the bottom plate of an SJ for the circuit I built. If you want you can easily install a simple timer under there.
Any questions at all let me know!
Yours,
-Eric
-
Permalink Reply by Ricky Sutton on -
Awesome!
This is exactly what i needed. Thanks a lot.
I'll be in touch when i get the project underway.
~R
Eric Tissot said:Hey man!
Check out this discussion:
http://www.baristaexchange.com/forum/topics/external-grinder-timer?...
There is actually quite a bit of room under the bottom plate of an SJ for the circuit I built. If you want you can easily install a simple timer under there.
Any questions at all let me know!
Yours,
-Eric
-
Permalink Reply by jt on
-
This:
http://cgi.ebay.com/DIN-Digital-Timer-Digital-Twin-Timer-OMRON-rela...
A solid state relay and a momentary switch are the most inexpensive way to go!
Or a used Gralab timer.
Barista Exchange Partners
Barista Exchange Friends
Keep Barista Exchange Free
Are you enjoying Barista Exchange? Is it helping you promote your business and helping you network in this great industry? Donate today to keep it free to all members. Supporters can join the "Supporters Group" with a donation. Thanks!
Barista Exchange Meet Up D.C.
© 2013 Created by Matt Milletto.
